The Introduction of an Original

Welcome the All-New Exxus VRS

Employing features like a ceramic atomizer, 15 second heat up time, 3 different voltage settings (3.0V, 3.5V, 4.0V) and more, the Exxus VRS delivers superior sessions whenever, wherever.

vrs-1.jpg

A Closer Look

What can the Exxus VRS Do?

vrs-key-features (1).jpg

A better question is, what can’t it do? The Exxus VRS by Exxus Vape offers the ultimate versatile use in one unit. Offering 3-in-1 different ways to vape with a bonus 4th way making a true 4-in-1 device. Users can transform the device to customize their sessions to their liking. Perfect for oils as well as concentrates, it features key qualities like a ceramic atomizer, 15 second heat up time, 3 different voltage settings (3.0V, 3.5V, 4.0V) and more.

4 in 1 Ways

Showcases

vrs-dab-rig.jpg

To use the rig, fill it up with water. Insert the battery into the rig and click the button three times to raise the voltage to your liking. Click the button twice to initiate sesh mode. This lasts for 15 seconds and you can also start this mode by simply holding down the button to heat and begin vapor production. To end sesh mode at any time, click the button one time.

Once you activate the unit, inhale from the mouthpiece to begin the vapor production. Press the carb once the rig is filled with vapor to release airflow. Pressing the carb down opens a hole on the cap that allows the air as well as vapor to flow freely through.

vrs-nectar-collector.jpg

Remove the cap from the heating tip and make sure the tip has fully cooled down before removing it as it is extremely hot. To raise the voltage, click the button three times and to initiate a 15 second sesh mode click it twice. You can also start sesh mode by holding down the button to start and begin the vapor production.

Once the heating tip has been warmed to your desire, press the tip against the concentrate and gently inhale. Pressing the carb down opens hole on the cap that allows the air and vapor to flow freely through.

vrs-cartridge-vape.jpg

Once the cartridge has been connected power on the device. Click the power button 3 times to raise the voltage to your desired level.

BONUS Way to Use A Cartridge

vrs-cartridge-rig.jpg

Charging the VRS

Keep the Sessions Coming

When first getting the Exxus VRS you are going to want to charge the unit for about 2 hours. Make sure not to charge it more than 2 hours as overcharging will wear it down and could possibly lead the device to not working at all.

vrs-4 (1).jpg

While the unit is charging the LED light will glow red. Once the unit is finished with the charging process, the LED light will glow green for about a minute and then shut off, initiating ready for use.

Cleaning the VRS

Keep Up with Your Device

Keeping your device clean is a must! If you want to continue to have pure sessions, you need to keep your unit in the best possible shape. Pro tip: Try to clean your device after every use.

First start by removing the magnetic top and button caps so that you can have access to the battery. Using an alcohol-soaked cotton swab, gently wipe the connection point as well as the caps to get rid of any and all residue. One the caps have been cleaned, set them aside to wipe down the top and bottom of the battery with a clean cotton swab.

Now, carefully pull the metal tube from the battery by the crescent tab on the bottom of the VRS. Once the tube has been pulled out, use another alcohol-soaked swab to thoroughly clean both the tube and the inside of the battery. When finished, place the tube inside and replace the covers. Make sure the crescent tab faces inside.

vrs-2 (1).jpg

Now, carefully pull the metal tube from the battery by the crescent tab on the bottom of the VRS. Once the tube has been pulled out, use another alcohol-soaked swab to thoroughly clean both the tube and the inside of the battery. When finished, place the tube inside and replace the covers. Make sure the crescent tab faces inside.

Cleaning the Attachment

Keep the Vapor Production Coming

Making sure to clean the attachment is important to vapor production. For optimal performance, clean the attachment every day after use. Keep in mind to always make sure the unit and accessories are cool before cleaning.

vrs-3 (1).jpg

To clean the hydro tube, first remove it from the VRS. Slowly pour 99% isopropyl alcohol into the mouthpieces until the unit is about ¼ full. Next, rinse out the alcohol and pour water into the mouthpiece until all the alcohol has been thoroughly flushed. To remove water from the device, blow through the mouthpiece and shake it gently, wipe dry.

Included

What Comes with Your VRS

vrs-includes (1).jpg

With the bonus 4th option, the VRS 4-in-1 is the ultimate versatile device. Made for your oils and concentrates, this unit delivers flavorful sessions with top performance. Utilizing features like a ceramic atomizer, 15 second heat up time, 3 different voltage settings (3.0V, 3.5V, 4.0V) and more the Exxus VRS produces superior sessions every time.

vrs-5 (1).jpg

WARNING: Do not charge with a powerbank of 5V or higher. Do not charge in your car. Do not overcharge or use any other charging cable other than what comes with your battery. Failure to follow these instructions could result in battery damage and frying of the internal system.