Wulf Mods Fang 2-in-1 Vaporizer

Discover the Wulf Fang: Precision Vapor, Elevated Experience

Enhance your sessions with the Wulf Mods Fang 2-in-1 vaporizer, designed for versatility and performance. Featuring a ceramic atomizer tailored for wax concentrates alongside a 510-thread connection compatible with oil cartridges, this device adapts to your preferred consumption style.

Its tinted glass bubbler ensures smooth vapor delivery, while four adjustable voltage settings (2.5V, 3.0V, 3.5V, and 4.0V) let you customize intensity with ease. An LED indicator provides clear status updates, and one-touch operation simplifies use. Powered by a robust 1600mAh battery, the Fang includes a Type-C charging cable for fast and convenient recharging.

Experience reliable quality and thoughtful design that supports your hemp wellness journey—available now for those who value both function and flexibility.

Getting Started with the Wulf Fang:

To power the Wulf Fang on or off, quickly press the power button five times. Once it’s on, press the button three times to increase the temperature.

For manual mode, press and hold the power button; release it when you’re finished. To switch to auto mode, tap the power button twice. Press once to stop.

Loading concentrates into the Wulf Fang is straightforward—just follow these simple steps to ensure optimal performance.

How to Load Concentrates:

Start by removing the glass bubbler from the battery. Next, screw the ceramic atomizer securely into the base and place a small amount of concentrate into the chamber—remember, less is more. Then, reattach the glass bubbler to the device. To activate, either double-click the power button to enter auto mode or press and hold it to begin preheating for vapor production.

Tip: Avoid overfilling the chamber. Using too much wax can flood and damage your device, so a little goes a long way.

How to Load Your Cartridge:

Start by removing the glass bubbler from the device. Next, securely screw your cartridge into the 510-threaded battery connection. Once connected, place the glass bubbler back onto the device. To adjust the voltage, press the power button three times until you reach your preferred level. Activate auto mode by clicking the power button twice, or hold it down to heat and start vaporizing manually. To stop auto mode, press the power button once.

When the bubbler is filled with vapor to your liking, simply remove it from the device and inhale.

How to Charge Your Device:

For optimal performance, begin by charging your unit for 1.5 to 2 hours on the initial use. To protect the battery and extend its lifespan, avoid charging beyond two hours thereafter.

While charging, a red light will indicate the process is active. Once fully charged, the light will switch to green, signaling your device is ready to use.

How to Clean Your Device: Start by detaching the glass bubbler from the vaporizer. Pour 99% isopropyl alcohol into the mouthpiece until it’s about one-quarter full. Swirl gently, then rinse thoroughly with water. To remove leftover moisture, blow air through the mouthpiece. For other components, use a cotton swab soaked in alcohol to ensure a deep clean.

Troubleshooting Tips:

• Auto Shutoff Warning: If you press and hold the power button for more than 30 seconds, the device will flash and stop heating automatically.

• No Cartridge/Atomizer Warning: The device flashes five times if it doesn’t detect a cartridge or atomizer.

What’s Included in the Package:

• Wulf Mods Fang 2-in-1 Vaporizer

• Ceramic Atomizer

• Glass Bubbler

• Three Q-Tips

• Type-C Charging Cable

• User Manual

This clear guide helps you maintain your vaporizer’s performance while ensuring safe and effective use every time.