Wulf Mods Evolve Plus XL Duo Manual
- Preparing the Wulf Mods Evolve Plus XL Duo 2-in-1 Vaporizer Kit Note: The power button is positioned in the center of the battery, facing outward, and has an elongated shape on the vaporizer battery. It is essential to perform a sterilization process when you first receive your Wulf Mods Evolve Plus XL Duo 2-in-1 Vaporizer Kit. This step will help eliminate any impurities that may have entered the heating chamber during production. To start, charge your Wulf Mods Evolve Plus XL Duo 2-in-1 Vaporizer Kit before its initial use. Once the battery is fully charged, turn on the device by pressing the power button five times. After powering on the Wulf Mods Evolve Plus XL Duo 2-in-1 Vaporizer Kit, you can proceed with the sterilization procedure. To sterilize the coils, press and hold the power button for five seconds two or three times. After this, allow the vaporizer to rest for about two to three minutes. Following this resting period, you can begin to load your chosen concentrates or dry herbs into your Wulf Mods Evolve Plus XL Duo 2-in-1 Vaporizer Kit.
- Loading the Wulf Mods Evolve Plus XL Duo 2-in-1 Vaporizer Kit – Wax:Note: Ensure that the dab tool does not make contact with the coils, as touching them with another metal can lead to damage. Detach the built-in concentrate chamber located at the bottom of your Wulf Mods Evolve Plus XL Duo 2-in-1 Vaporizer Kit. At the same time, get your dab tool ready for easy scooping of concentrates from the integrated chamber. If this is your first time using the device, remember to sanitize it beforehand. Remove the mouthpiece to access the coils and load your desired amount of concentrate onto them before replacing the mouthpiece. Herbs:Note: Avoid overpacking the herb chamber to ensure proper airflow. It’s important to grind your herbs prior to vaping. Prepare your ground material so that it can be easily transferred onto the coil. If you’re using your Wulf Mods Evolve Plus XL Duo 2-in-1 Vaporizer Kit for the first time, be sure to sanitize it first. Remove the mouthpiece to expose the coils and load in your ground herbs before putting the mouthpiece back on.
- Vaping with the Wulf Mods Evolve Plus XL Duo 2-in-1 Vaporizer Kit Before starting your vaping session, make sure that your Wulf Mods Evolve Plus XL Duo 2-in-1 Vaporizer Kit is fully charged, properly sterilized, and filled with either concentrates or herbs. Once everything is set up, place your lips on the mouthpiece and prepare to inhale. Press and hold down the power button; as soon as vapor begins to form from the device, inhale through the mouthpiece and observe vapor production. You can repeat this process as needed until all concentrates or herbs are consumed.
- Care and Maintenance For maintenance, occasionally perform burn-offs by pressing and holding the power button to melt any residue left behind, followed by wiping down and reassembling your device.